 |
| The Plug attached to the box with the valve plugged into it |
 |
| The Wiring of the relays to the pump |
 |
| The valve system |
 |
| Pipes where the fluids travel to the valves |
 |
| Pipe where the fluid leaves the valve |
 |
| Wires for the valve and the power supply |
 |
| The relay circuit with the power supply |
 |
| Close up of the circut |
 |
| The micro-controller |
 |
| The power supply |
 |
| The dispenser area |
 |
| The tanks in the machine |
 |
| The Coin Sensor |
 |
| The motor to start the process |
 |
| The tilt switch |
 |
| One led at the end of the track |
 |
| The first connection |
 |
| The second connection |
No comments:
Post a Comment